HYDRAN anti-wear hydraulic oils satisfy the requirements set by all major hydraulic equipment manufacturers including Vickers, Hagglunds-Denison, Racine, Cincinnati Milacron, Lee-Norse, Jeffrey and others. They are recommended for all types of hydraulic systems, especially those that operate above 1000 psi.
HYDRAN anti-wear hydraulic oils can be used in systems containing all types of hydraulic pumps including gear, radial piston, vane, and axial piston pumps. They are suitable for both stationary and mobile equipment service.
HYDRAN anti-wear hydraulic oils are also recommended for many bearings, machine tools, chains, light to moderately loaded gears and other areas where general-purpose oil is required.

Specification: ISO 6743/4-HM, DIN 51524 Р2-HLP, AFNOR NF E 48-603-HM, DENISON :HF-0,HF-2, VICKERS :M-2950-S и I-286, CINCINNATI-MILACRON : P68,P69,P70

FINA DACNIS P68; P100; P150

DACNIS P68, 100 и 150 are made from high quality naphthenic oil. These oils exhibit good flow characteristics at low temperatures making them suitable for cold weather service.
DACNIS P68, 100 и 150 are high-quality, additive-type oil recommended for the lubrication of multistage compressor cylinders and special rotary sliding vane compressors in air and inert gas service. It contains no metals and has very low ash.

Specification:
DIN 51506 VDL for usage in air-compressonrs
NF-ISO 6743-3A for usage in hard conditions approved by DAC.
ATLAS COPCO, BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER&SOHN, SULZER BURCKHARDT, TANABE